It's time to get tougher on your bathroom cleaning problems. With Tilex® and the cleaning tips below, your bathroom will shine like never before. Please pick a product and we'll provide the advice you need to get an easy clean.

Tilex® Mold & Mildew Remover
Tilex® Mildew Root™ Penetrator & Remover
Tilex® Soap Scum Remover
Tilex® Fresh Shower® Daily Shower Cleaner

1. Avoid prolonged breathing of vapor. Use in well-ventilated areas. Open windows and turn on fans before use. If vapors bother you, leave the room. For sensitive skin or prolonged use, wear gloves.
2. Directions for using Tilex® Mold & Mildew Remover:
   • Rotate nozzle counterclockwise to open.
   • Spray on glazed ceramic tile, grout, tubs, fiberglass, shower doors, vinyl shower curtains, sinks and no-wax floors.
   • Allow mildew stains to disappear, then rinse well.
   • Rinse immediately after use on rubber or vinyl, bathmats and items such as shower curtains.
3. To disinfect and kill mildew on hard non-porous surfaces: Spray surface such as tile until thoroughly wet, let stand five minutes and rinse. For heavy soil, pre-cleaning is required. This product kills staph, strep and athlete's foot fungus.
4. Do not use on painted or paper surfaces, or on fabric. Avoid prolonged contact with metal and old porcelain.
5. Do not combine with household cleaning products. Mixing household chemicals can release hazardous gases.

1. Avoid prolonged breathing of vapors. Use in well-ventilated areas. Open windows and turn on fans before use. If vapors bother you, leave the room while product is working. For sensitive skin or prolonged use, wear gloves.
2. Directions for using Tilex® Mildew Root™ Penetrator & Remover:
   • To remove mildew stains: Turn nozzle to FOAM position. Spray 6-8 inches from surface until thoroughly covered. Allow foam to deeply penetrate mildew and problem areas. Wipe with a wet sponge or cloth, and rinse. Heavy mildew buildup may require longer contact time or two cleanings.
   • To disinfect and kill mildew on hard non-porous surfaces: Spray surface, such as tile, until thoroughly wet, let stand five minutes and rinse. To disinfect and kill mildew on hard porous surfaces, such as grout and cement: Spray surface until thoroughly wet, let stand 10 minutes and rinse.
   • This product kills staph, strep and athlete's foot fungus.
3. Where to use:
   • Grout, tile (glazed and unglazed ceramic), tubs, sinks, counters, shower doors, vinyl curtains, glass, plastic, no-wax floors and windowsills.
   • Rinse immediately after use on rubber, plastic, vinyl.
   • Avoid prolonged contact with metal and old porcelain as this product can react with these materials and leave a "rust" stain.
   • Do not use on wood or painted surfaces.
   • Avoid contact with aluminum, clothes, fabric, carpet or paper surfaces as they will discolor
4. Mixing with other household chemicals can cause serious chemical reactions and should be avoided.

1. Tilex® Soap Scum Remover cleans and deodorizes bathroom surfaces, glass walls and shower doors, glazed ceramic tile, plastic, chrome, fiberglass, glazed porcelain and synthetic marble.
2. Do not use on natural marble, brass or varnished wood.
3. Tilex® Soap Scum Remover is non-abrasive and will not scratch.
4. Directions for Tilex® Soap Scum Remover:
   • Rotate nozzle to "on" position. Pull blue nozzle ring out for foam, or leave in for spray.
   • Spray 6-8 inches from surface and allow product to penetrate dirt and soap scum.
   • Wipe with a wet sponge or cloth, or rinse with water. No scrubbing required!
5. For tougher jobs, rotate nozzle to foam for deeper cleaning, let product stand on surface for several minutes before wiping/rinsing. For best results, use regularly to prevent soap scum build-up.
6. Do not combine household cleaning products. Mixing household chemicals can release hazardous gases.

1. Always stand on a non-slip surface when in the shower or tub. Run your shower for a few seconds before entering.
2. For best results, start with a clean shower. Immediately after showering, mist Tilex® Fresh Shower® on all surfaces, including glazed tile, tub, shower curtain or door. Do not rinse, wipe or scrub. If you see streaks, rinse off and apply less.
3. If starting with a partially soiled shower, you will not see immediate results. Tilex® Fresh Shower® loosens built-up deposits and will clean your shower in 2 to 4 weeks. If pre-existing deposits remain, wipe away with a soft cloth while showering.
4. To keep your shower clean, continue to mist Tilex® Fresh Shower® every time you shower. A 32-oz. bottle should last about 4 weeks.
5. Surface Safety: Tilex® Fresh Shower® works safely on shower surfaces. It is non-abrasive and contains no harsh chemicals. Do not use on natural marble, brass, acrylic, or varnished wood. For all other surfaces, test in an inconspicuous area.
6. Storage Suggestions: Bathtub ledge or shower caddy.